Let me talk about Venus first.
Now there are more and more friends playing the lobular rosewood bracelets. The lobular rosewood bracelets are not only good to wear, but also have a good patina effect, and it also has a high collection value. The value of lobular rosewood is also growing, so the collection of lobular rosewood is also unprecedentedly high. Among the lobular rosewood, there are some rare lobular rosewoods. For example, we often say that Venus lobular rosewood, Venus lobular rosewood is rarer than ordinary lobular rosewood, so the collection value of Venus lobular rosewood is higher than ordinary lobular rosewood. However, if the Venus on Venus lobular rosewood falls off, the value will be greatly reduced. Many friends are worried that the normal disk will not be able to discard the Venus on the lobular rosewood. I will introduce it to you.
There is a saying that the true Venus will not fall, and the fake Venus will fall. Is this correct? In addition, we often see some propaganda in the market is that the lobular rosewood Venus will be more and more, the Venus will not fall, is this correct? These statements are actually not completely correct.
First, from the perspective of fake gold stars
1. There is a kind of fake gold star which mixes metal powder and glue into the hole of the catheter, so it looks like Venus. Because of the strong adhesion of the glue, the fake gold star can be said to be very difficult to fall off, at least for a while. It is not easy to fall off inside.
2. One of the fake gold stars is that the sandalwood powder is filled into the brown eye during the grinding process, and then the thick car wax or the floor wax is even used to keep the "Venus" for a long time. After wearing and playing for a while, The powder is easier to fall and shows brown eyes.
Second, second, from the real Venus
The real Venus is due to the mineral deposits mixed with the resin and condensed in the duct. After cutting, you can see the gold and gold wires one by one, but this real Venus is only a mixture of minerals and resin. Naturally formed afterwards.
(1) Although it is a true Venus in the following cases, Venus is also easy to fall off:
1. Although filled in the catheter hole, if it is exposed to sweat during long-term play or wearing, the corrosive effect of sweat will cause some or all of Venus to disappear.
2. If you are wearing gloves or playing with a cloth plate, if the fabric is too thick and too hard, and the disk is too strong, the fabric fiber will easily wear out Venus, which will also cause the Venus to fall off.
3. If the beads are made from new material of lobular rosewood, Venus beads are not easy to fall due to insufficient density and large brown eyes.
(2) So what kind of Venus is not easy to fall off?
1. The real Venus is only under the condition of good maintenance, normal wearing or playing will not cause or not easy to lose Venus.
2. If you don't touch the sweat, don't touch the water, don't force the plate, the material of the bracelet is old enough, the resin concentration is high enough, the material is good, the oil is sufficient, the density is large, Venus is not easy to fall off, after forming the patina, Venus also Can be kept lasting.
Therefore, whether it is true or false Venus lobular rosewood, it is easy to fall off and not easy to fall off, buy lobular rosewood, the most important thing is the material of the lobular rosewood itself.
It’s also the most complete bracelet.
1. Agarwood:
In fact, the agarwood beads do not need to be deliberately played, although the pulp will make the bracelet better, but the pulp layer may block the pores on the surface of the bracelet, making the fragrance difficult to emit, resulting in weakened flavor even There is no fragrance at all. Only a few of the oily and high-quality agarwood can form the patina while the fragrance is also emitted. Therefore, the agarwood beads bracelet does not need to be deliberately played, you can wear it at will!
If the agarwood beads bracelet has a pulp, you can also take some methods to remove. The towel can be soaked in hot water, wrung out until it is out of water, and then wrapped in agarwood bracelets. After a few minutes, the pulp on the surface of the agarwood can be wiped off with toilet paper, preferably in a sealed can. Sealed in the day. There is another method. Most people use sandpaper to polish it. However, this method of grinding has a certain loss to the beads. Although it is very small, if it is often polished, the beads will become more and more. small. So when the bracelet is just beginning to be sizing, when the layer is still very thin, you can wrap it with a warm towel that has been completely wrung out for a few minutes, then wipe the surface of the layer with a toilet paper. This method is for beads. There is no harm in itself, and the oil consumed is minimal.
2, Hainan huanghuali (including Vietnamese huanghuali):
1. Huanghuali is a pattern to win, beautiful patterns tempting us to continue to "save a bag", the charm is endless! However, huanghuali is not easy to "plate" directly by hand. For a period of time, the wood will be dark brown (the color is not as noble as red sandalwood) to cover up the beautiful pattern (but as long as it is seen in warm light or sunlight).
2, it is recommended to use a bath towel to rub the surface of the beads carefully (some new processing is very good), and then directly by hand, but will eventually turn black, my point of view: Huanghua pear bracelets It is often recommended to use the hand plate, and it is recommended that you do not take it often, and you can take it out of the gap and display it.
3, the gestures of the disc, the steps and the same as the red sandalwood.
3, lobular rosewood:
First of all, one thing to be reminded is that the wood of rosewood is fine and oily, and it is not easy to deform and crack. Therefore, there is no need to put any oil on the plate, otherwise it will be more than one. Let's talk about the specific steps.
1. First wipe off the dirty material on the surface of the beads and the wax layer. Use a bath towel. About two or three hours a day, for two days.
2, then use a soft cotton cloth for a week. If you slap the lobular rosewood bracelet, there will be red marks on the surface of the soft cloth. At this time, you should not panic and will not affect the quality of the rosewood bracelet.
3. Place it naturally for a week. Let the beads dry naturally while the lobular rosewood bracelet is easily oxidized and then form an oxide film. This actually protects the red sandalwood from further oxidation. The oxidation process occurs when placed naturally.
4, start with the hand plate. The requirements of the hand is very high, must be clean and dry, if you have sweat, wear gauze gloves. About a day can be about 30 minutes, for a total of about one week to two weeks, then you will find a phenomenon, dry hand beads have a sticky feeling, which means that the surface of the beads formed a thin layer of patina.
5, after the formation of the pulp, it is the hardening of the pulp, about a natural place for a week.
6. Repeat the process of 4 and 5 for a total of 3 months. At this time, the beads will be plated. You will find that the surface of the beads has a strong aura. Under the sunlight, there will be reflected light.
The above is the process of the lobular rosewood bracelet. Although it takes a long time, I feel that when you see your achievements, you will not feel tired and boring. On the contrary, it is a kind of spiritual enjoyment.
4, sandalwood:
Generally, the more popular method is: receive the new bracelet, first use white cotton cloth or white glove to play for a period of time, a few days to a half month, do not hurry to get started, this is because the surface of the sandalwood handball just released No grease comes out, no thin protective layer is formed. If it is wet or dirty at this time, it takes a long time to wear it to slowly dissolve, affecting the appearance and smell. After playing for a week and a half months with cotton and gloves, the surface becomes smoother and ready to wear. There is no problem with slight water, but you can't wear a bath and swim.
Sandalwood beads beaded Dafa:
The disc is made of cotton cloth, which is relatively smooth. Use this cloth to lick it. Later, the beads will become very transparent and very clean.
If there is sweat on your hand, there will be a layer of oil on the surface, which contains sweat and mud. In this case, the beads look very smooth, but it is dirty, and the light is thief and black.
1. It can be considered polished with a soft cotton cloth for a week.
2, naturally placed for a week. Let the beads dry naturally. At the same time, the surface is evenly contacted with air to form a fine and uniform oxidized protective layer. Take care to avoid high temperatures and direct sunlight.
3. Start the hand tray. At this time, the hand must be just washed and dried. The sweater should not use the disc directly. It is best to wear a sand cloth glove tray. The dry hand and the sweaty hand can be directly placed on the disc. Be sure to use the disc around the hole of the bead. At that time, you can take about 30 minutes a day. After one week to two weeks, you can feel the sticky feeling of the hanging plaque when you dry the beads. In fact, this is a thin bag of beads. Pulp.
4, at this time can be placed for a period of time, and then naturally dry, but also the pulp to a certain degree of hardening, usually about a week.
5, repeat the process of 3 and 4 5 to 6 times is 3 months, you will see your beads have a strong aura, the well-prepared beads sometimes show a strong reflection, some like glass luster .
It is important to note that wood beads should not be exposed to large moisture at any time. If the beads are dirty, they can be wiped with a slightly moist cotton cloth several times, then put them for a while and then play, all the beads in the plate. Try to get the best, especially the orifice, the most taboo of the bead is the quick success, you can only slowly come to a process of a process, with the change of the beads can also get a spiritual pleasure.
5. Vajra Bodhi:
Pick the secret recipe of Vajra Bodhi:
1, the density is best submerged, straight sinking best, soaking for a while, not sinking in general, floating on the water is not good.
2, the color difference of the phase is relatively uniform (stained attention should be paid), the groove is deeper and the texture is clear, the size is the same, no broken teeth, the number of petals is clear and uniform, the seeds are not cracked, and the perforated end with punching is in the middle .
3, the number of petals regardless of the size of King Kong, the five-petal is more common, the more the number of flaps more than five petals the better (high value), less than five less as much as possible.
4, the pile type is generally better (flat) the difference between the two: small diamonds generally refer to the diameter of 1.0cm or less, the smaller the more valuable, but less than 0.6 should pay attention to there is another Plant seeds like Xiaojingang (looking like Xiaojingang but not so detailed, the diameter is about 0.4-0.5). Dajingang is generally better than 2.0 (higher price). The above is the selection of King Kong.
Vajra Bodhi's disk play:
If King Kong is selected, it will be much easier to play. If you use a brush to clean it and dry it, you can get it right. (I think it is a way to play the lobular rosewood with cotton cloth, not practical Vajra Bodhi). Just be careful not to touch the water as much as possible. If you are a grease skin, even though it is well-prepared, King Kong is very oil-absorbing. For the oily skin, it will have a good patina in the summer. King Kong can wear it more in the summer, and wear it with a rope to hang it around the neck. Come out and make a quick meal. If you are not oily skin, start with a little olive oil to prevent cracking, but after the budding effect comes out, you don't have to, mainly rely on the plate. In fact, I have said so many ways to play, I think the most important thing is perseverance. As long as you take it on your hands every day, you can wear it on your body. Even if you don't need any method, you can have a very good effect. Another trick is that you can have more. Prepare some seeds to wear together, after a period of time, there will be some color difference, and then propose some unevenness, so continue to guide the color difference is completely consistent, of course, if you have enough patience, the color difference will be even sooner or later (in the selection of seeds is no problem) In case).
6, Xingyue Bodhi:
1. Use a bath towel to force the surface of the bead. The effect is actually to clean the wax layer and dirty color on the surface of the bead and to re-polish. Two to three days about 2-3 hours a day.
2, using a soft cotton cloth for a week is also considered polished. At this time, there will be red marks on the surface of the soft cloth. This is normal, and the color will fade after one week.
3. Place it naturally for one week. Let the beads dry naturally. At the same time, the surface is evenly contacted with air to form a fine and uniform oxide protective layer.
4, start the hand plate. At this time the hand must be just washed and has dried out. Khan hand please do not directly disk. Note that bead around the hole must be plated. One day can be about 30 minutes. One week to After two weeks, you can feel the sticky feeling of the hanging plaque when you dry the beads. In fact, the beads have formed a thin layer of patina.
5, then you can put it for a while, then carry out natural drying. Also let the patina carry a certain process
Degree of hardening. Generally it is about a week.
6. Repeat the process of 4 and 5 for 5 to 6 times, which is 3 months. You will see that your beads have a very lustrous luster. The well-prepared beads sometimes show a strong reflection, some like glass luster. .
Special attention is required:
If the beads are dirty, you can wipe them with a slightly moist cotton cloth for a few times. Then put them for a while and then play them. When you are in the tray, all the beads are in the pan. Especially the holes. The most taboo is the quick success. You can only slowly come to a process and a process. With the change of the beads, you can also get a spiritual pleasure at the same time.
7, Jin Sinan:
Jinshen is the king of cork that combines the beauty of heaven and earth. Jinsi Nanpan is the pursuit of gold silk, fluorescent transparency, aroma, color and patina; it has the same characteristics as red sandalwood, sea yellow and agarwood toys. There are also different concepts in place, and the problem of playing and maintaining the golden nanmu bracelet is particularly important. The correct disc play not only can perfectly maintain the texture of the golden silk bead itself, but also make the gold silk of the golden silk hand beads perfectly rendered, more lustrous, making the beads transparent, rich in amber fluorescent and patina color. Aesthetic.
Step one, play the golden silk, clean is the premise; first use cotton gloves or silk cloth to remove the surface of the hand beads, this can remove the wood powder layer on the surface of the hand beads, which lasts for about half an hour every day, adhere to Fluorescence and transparency are evident throughout the week. Do not use your hands directly to discard sweat and water, oil.
Step 2: Complete the above step, and don't worry about going to the disk. In the next week, we need to pack the golden nanmu bracelet with a hand bag and put it in a cool place. If you can, you can set up a special small refrigerator for low temperature storage. After a week, take it out and let it go for a week. The surface is oxidized in contact with air. The color of the surface of the beads begins to slowly turn into gold, purple or black gold.
Step 3, after another week, began to work on the beads. When you are on the bead, be sure to keep your hands clean and dry, and avoid wearing a sweaty hand. When the beads are in place, the surface of the bead should be evenly distributed, so that the beads are slightly warm, especially around the holes of the beads. This will last for half an hour every day. For a week, you will find that there is a slight sticky feeling when the beads are placed. This is the performance of the patina formation.
Step 4: If you are accidentally stained with sweat and hands, turn black or lose luster, rogue can be washed with water and then heavy plate. You can also wipe the palms with a little natural olive oil and then put the beads on the hand. Of course, this string of beads will not be the best. Some common materials can be directly used by your body oil. . . .
Next, use a special small cloth bag to raise it. Repeat the two or three steps. After about 3-4 months, you will be surprised to find that the surface of the golden silk hand beads is crystal clear, and the golden gold is charming and moving. Phantom, full of aura.
Playing the handball is a process of cultivation and cultivation; many friends are eager to find a good result, but they have lost the fun of playing the game and found the beauty of Jinsi Nan. Panjin Nanmu bracelets can be used for peace of mind, and you can add value while you can play and improve your taste.
8, blood dragon wood:
The method of playing the blood dragon wood bracelet is actually the same as other wood bracelets, and it is similar to the rosewood bracelet. Here to introduce to you how to play the blood dragon wood bracelet.
The method of playing the blood dragon wood bracelet:
The method of blood dragon wood is determined according to the characteristics of blood dragon wood and the maintenance method of blood dragon wood bracelet. There are five ways to play the blood dragon wood bracelet:
9, Wenwan walnut:
Wenwan walnuts are not the correct way to play, and good walnuts will be ruined.
1. Be sure to play slowly without any sound. Whether it is from the movement of the finger joints or the idea of ​​calming the mind, the fitness effect will be 100 times stronger than the “biting the walnutâ€. Play itself, pay attention to is an artistic conception.
2, to clean up while playing. In the early years, the walnuts were not allowed to be used by others within three years. Different hands, different chemical composition, that is, the old saying "popular" is different, the impact on walnuts is different. Will directly affect the color of the walnut. The same is true today, who knows which country cosmetics you use? Which country is the hand oil? From today's point of view, it is also for health. The texture of the walnuts will be dirty and dirty.
During the play, you need to clean the walnuts frequently, otherwise it will affect the color of the walnuts.
Always have a brush, and the person who is serious can buy a professional brown hair brush, and the toothbrush is also available. At the beginning of the game (in the early stage of coloring), it takes more time to clean up than to play.
3. When the walnut is not in use, use a napkin to wrap it in a sealed box, and use a dry napkin to absorb the attachment on the walnut. The texture is deep, and a small group of paper is placed with a toothpick. This is also a long-term method of placing walnuts, and you can also add plastic bags to the paper. Without changing the dryness of the walnut, the walnut will not crack (this is also related to the texture of the walnut).
The discoloration of walnuts is a long process. From this "difficult" process, we can experience a lot of fun, and it will be a long-term integration with the beloved walnut.
Be sure to play slowly without speaking
10. Olive nucleus:
There are seven main ways to play:
1. Push: Place the nucleus on the arm and slowly push it forward until the arm is red and hot. It can be paused for a while and has the effect of accelerating blood circulation.
2. æ‹: Mainly for rosary beads and bracelets, holding a nucleus of rosary or bracelet, swaying up and down the arm.
3. æŽ: Place the nucleus in the palm of your hand, then squeeze it with your thumb and another finger.
4, æ»: mainly for rosary and bracelets. Hold one of the nucleus with your thumb and forefinger, and then lick each nucleus on the string.
5. Move: Put the nucleus in the palm of your hand, and then make a short shackle.
6. Hey: Put the nucleus in the palm of your hand and slowly roll it up and down.
7. Shake: Hold the nucleus in your hand and shake it up and down.
However, in the process of playing, you should also pay attention to the following issues:
1. If it is a new nuclear, it is best to play it for about 1 month. After the pulp surface appears, the bracelet will not be easily cracked.
2, the new nuclear most avoid wind, water and high temperature, so in the winter and spring when playing, you must do the appropriate accommodation work. Especially in the north, due to the dry climate, the nuclear is prone to cracking once it is not properly maintained.
3, when you are free, play more, so that the nuclear disk will be out faster.
4, summer is the best playing season, don't miss it.
5, the body's sweat and oil are best for raising olives.
6. When not playing, it is best to put the bracelet in a sealed small bag or plastic bag to avoid cracking due to the wind.
7. If you find that the bracelet is dirty, find a soft brush and gently wipe it with a little oil.
8. When playing on the plate, do not squeeze or rub it too hard to avoid deformation or damage of the nucleus.
At the beginning of the olive carving work, you must pay attention to the following points:
(1) Do not see water. The olive nucleus is not afraid of water, but the wet and dry unevenness inside and outside will definitely crack after being wet.
(2) There should be less oil. No matter what oil, there is much water in the oil, and the oil is much more natural. Therefore, when you need oil maintenance, a drop of two drops will be fine.
(3) Do not store in a dry environment. The olive-encrusted sculpture itself contains a certain amount of water. In a dry environment, it will cause its own dry and wet unevenness, which will cause dry cracking. This is especially important in the northern region. For example: heated rooms in the winter, sun exposure, long hair dryers, etc.
(4) "Ninghua does not crack." In the process of playing nuclear sculptures, it is easy to appear "flowers" and "cracks". "Flow" is generally caused by oil, and "crack" is generally caused by uneven wet and dry. After the nuclear sculpture works "flowers", it will gradually fade or even disappear during the process of playing, and its influence on the value is small. After the nuclear carving works are "cracked", after treatment and maintenance, although it will not crack again, it will not become smaller or disappear, which has a great influence on its value.
Women's Blouse,Women Blouse Summer Long Sleeve,Women's Printed Beach Blouse,Half-Sleeve Japan Style Blouse
Shaoxing Lanyu Import And Export Co.,Ltd. , https://www.lanyuclothing.com