Wool scare craft guide

Wool scare craft guide sweaters are divided into: flat, suit, pointed, saddle, called the four big. Straight clips, clips, and clips are called three clips.

How to take the square: First weave a piece of cloth to wash the hot to determine the density, feel the ok, and then according to the number of needles and the number of revolutions to find how many needles and how many turns per inch.

Example: The number of stitches of the cloth is 150 × 100 rpm, and the measured size is 16 × 16 inches. The obtained square number is: 9.375 (horizontal) × 6.25 rpm (straight dense).

The method of pulling force: for example, the sheet of 100 turns has a pulling force of 18 inches, and the data obtained by 18 ÷ 100 is 0.18. Using this data multiplied by the full-length number of revolutions, the full-length pulling force is obtained.

The difference between the clip and the clip: When the sleeve arm width is wider than the clip width of 1.1/2 inches, the clip should be made. If the sleeve arm width and the clip width are only 1 inch apart, it should be considered as a clip.

As for the saddle, because of the complicated structure of the shirt, it is more time-consuming in terms of workmanship, so basically there is no such thing in recent years.

Saddle shirt, here the saddle-length process is skipped.

Straight clip flat shirt type scare number process

Back frame

Chest wide × horizontal density = rear opening

Length - foot height × horizontal density = rear full length rotation

夹宽-1/2 inch × straight density = the number of rotations on the folder, the total number of revolutions - the number of rotations on the folder = the number of rotations under the folder - wide collar - 2 × horizontal density + sewing needle count = shoulder wide needle (each side)
Leading -3 / 4 inch × horizontal density (collar collar with collar width × 0.65 calculation) (round neck)
Collar depth × direct density = collar deep rotation number front chest width is 2 to 4 needles more than the rear width can also be the same as the rear panel, depending on the organization

Length - foot height × straight density + seam consumption (generally 3G, 5G, 1 turn, 7G, 9G, 12G3 ~ 4 turn wide - 1/2 inch × straight dense + seam consumption wide, wide and the same width The same collar is calculated the same as the back frame (the collar is calculated with 0.35) (round neck)
The number of deep turns of the collar × 0.55 = the number of revolutions,
The number of needles received by the collar = wide collar - the number of needles in the collar is ÷ 2 (the needle must be rushed first and then slow) (round neck)
Sleeve sleeve length (bow length) - sleeve height × straight density × 0.97 = sleeve length, number of sleeves, arm width × 2 × horizontal density + seam consumption = sleeve plus needles, sleeves, remaining needles = sleeve arm width (4R (5t
Sleeve wide × 2+ 1/2 inch × horizontal (same)
Sleeve straight position to stay 1.3/4~2 inch 1^WGJ"1
Sleeve plus needle number = sleeve arm wide - sleeve opening needle ÷ 2 (plus needle first fast and slow)
Sleeve plus needle rotation number = full length rotation number - straight position rotation number
Suit shirt type scare number craft
Rear width chest width × horizontal density = rear width of the needle opening length - foot height × straight density = full length rotation number wide - 1/2 inch × straight density = folder rotation number (full length rotation - folder rotation number = Clip down number)
Abdominal × direct density = number of shoulders dM -cQo:
Width - neck wide 2 × horizontal density + seam consumption = shoulder wide needle (each side)
Clamping rotation number = pinch rotation number × 0.35
Number of pinches = chest wide - wide neck 2
Leading wide -3/4 inch × horizontal dense collar deep × straight dense = collar deep rotation number front width chest width + 1/2 inch × horizontal density = front opening needle length - foot height × straight density + seam consumption = front full Long clip width - 1/2 inch × straight density + seam consumption = pinch number of turns, number of stitches, number of stitches, shoulder width, neck width, collar width, collar depth are the same as the back frame algorithm 7 * 5B
Sleeve sleeve length (bow length) - sleeve height × straight density × 0.97 = sleeve length, number of sleeves, arm width × 2 × horizontal density + seam consumption = sleeve plus needle sleeve width × 2+ 1/2 inch × horizontal density = Sleeve opening needle sleeve left needle = front and rear clip straight position rotation ÷ straight dense × horizontal tight sleeve closing rotation number = front and rear closing rotation number + sewing sleeve straight position rotation number remaining 1.3/4 ~ 2 inch sleeve Number of needles received = sleeve arm wide - sleeves left needle ÷ 2
Sleeve plus needle number = sleeve arm wide - sleeve mouth wide ÷ 2 (plus needle first fast and slow)
Pointer shirt type scare number process

Rear width chest width × horizontal density = rear width of the needle opening length - foot height -3 / 4 inch × direct density = full length rotation number of the number of rotations = the number of rotations on the front frame + 3 / 4 inch folder rotation = full Long rotation number - the number of revolutions on the collar - 3 inches × horizontal density + seam consumption

Number of pinches = number of chest wide needles - number of wide needles ÷ 2 (receive the needle as much as possible or slow first)
Front width chest width + 1/2 inch × horizontal density = front opening length - foot height - 2 inches × direct density = full length rotation width (along the line) can be calculated by the law of the Pythagorean
Number of turns on the folder = wide x straight
After the number of rotations is the same as the back
Collar depth - 2 inch × straight pinch pin count = chest wide pin count - collar wide pin number ÷ 2 (as close as possible to average or fast)
Sleeve @rhS[^1wi+
Sleeve arm width × 2 × horizontal density + seam consumption
Sleeve length (post-moderate) - wide 1/2-sleeve height × straight density = full length number of sleeves wide × 2 + 1 inch × horizontal density = sleeve opening needle

Sleeve-needle needles generally take 3 inches + seams and sleeves for the sleeves = sleeve arms wide - sleeves and needles ÷ 2 (receive the needle first and then slow)
The number of sleeves is the same as the back frame (if the real collar is used, the number of rotations should be reduced)
Sleeve plus needle = sleeve arm wide - sleeve opening needle ÷ 2
Sleeve plus needle rotation number = full length - pinch rotation number - 1.3/4 straight position rotation speed (plus needle first fast and slow)

Flat Christmas Glass Ball

Clear Glass Ornaments,Flat Christmas Tree Glass Ball,Christmas Flat Bottom Glass Balls,Flat Christmas Glass Ball

BAOYING MEILIDA CHRISTMAS GLASS CRAFTS FACTORY , https://www.mldglass.com